CYP DS-MSC14-4K DS-MSC14-4K 1 to 4 multi-screen controller with 4K input support

The DS-MSC14-4K enables a 4K video wall to be created from any third party screens, the HDMI source can be displayed as a single image on each screen or 1 image across all screens. A single unit will create a 2x2 video wall. Multiple units can be combined with an HDMI distribution amp to create larger video wall configurations. Control is via RS-232, Telnet IP and our downloadable application which will allow full control of the DS-MSC14-4K from adjusting the bezel correction to pre-set video wall layouts.

• Adjustable Bezel correction
• The DS-MSC14-4K can be combined together using a HDMI splitter allowing the creation of larger video walls.
• Video wall configurations can be pre-loaded into the our control application allowing simple switching between the video wall layouts.
• One button push control allows one command to be executed to all connected devices e.g instructing all the screens to show one image per screen.
• The DS-MSC14-4K can be controlled via RS-232, Telnet IP control or our piece of control software which can be found on the downloads tab of the website.
• Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) dependent upon the output display’s EDID settings
• Audio supported LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/ Dolby TruHD & DTS-HD
• HDMI, HDCP 1.4 and DVI compliant