PIR Motion Sensor Activated Audio Player with Motion Activated Voice Prompter and 3.5mm Jack

• Uses a high-grade silver aluminum enclosure with a set of mounting brackets.
• Adopts the passive infrared detection technology, and the detection range is up to 5 meters.
• Built-in a high-quality MP3 player with great audio output.
• Works with most Windows, Mac, and Linux systems.
• Supports micro SD card (TF card) and have built-in 4MB internal flash memory for storage. Micro SD card NOT included. 
• Supports two triggering modes: single repeat mode and all loop repeat mode.
  • Single repeat mode: plays back the same audio file after each triggering.*     
  • Loop repeat mode: plays back the next audio file in the loop after each triggering.*
  • *Triggering DURING payback will NOT restart the message in either of the two modes.
• Equipped with a potentiometer for power-on/off and volume adjustment.   
• Built-in a 20W loudspeaker to make sure the volume is loud enough.
• 3.5mm audio output jack (mono) for connection to an amplifier or active speaker
• Power Adapter included (100-240V to 12VDC)
• USB Cable included (Type A male to mini USB port)
• Pivoting mounting foot included 
• For indoor use only
• Dimensions: 163mm x 123mm x 46mm

 Applications:

• An automatic interpreter applied in museums, galleries, exhibition halls, etc.
• Advertising in shopping malls, chain shops, supermarkets, elevators, etc. 
• As a voice announcer to deliver voice messages in banks, factories, schools, hospitals, etc.
• Voice guidance for blind people in public areas.
• As an audio reminder at home for people suffering from amnesia.
• As a voice alarm to warn people in some special occasions