AX-KPC 2.8IP Programmable 2.8" colour LCD Touch screen

AX-KPC 2.8IP Programmable 2.8" colour LCD Touch screen

Description

The Axium KPC 2.8-IP keypad is a programable 2.8” colour touch screen.

Capable of learning and sending Infra Red commands, the KPC2.8-IP can be used as a stand alone keypad to control virtully and IR controlled device.

When used with the Axium Multi-Zone amplifier or iKON MTX-A88 audio matrix, full 2-way feedback of source selection, power, mute & volume is provided.

Full 2-way RS232 and IP control is also available when connected to an Axium AX-R1D or AX-R4D controller using the prebuild Axium applets.

Setup by the Axium keypad manager software, the KPC2.8-IP includes a host of features to simplify programming and enhance the amplifier and source equipment control.

Key Features

• 2.8” LCD touch panel
• 2 Way RS232, Ethernet and IR routing when used with the Axium AX-R4D/R1D and supplied Applets
• Large IR database supplied. IR codes using the ‘HEX’ code format may be imported into Axium Software
• Portrait or Landscape display orientations
• White & Black cover plates supplied for both European and Australasian / USA styles

Specifications 

2.8” LCD touch panel
       Contract Ratio = 500:1
      Viewing angle = 160° (H & V)
      240 (RBG) x 320 Dot 64K Colours

Operating Voltage: 12V DC ± 3V
      Current typically 60mA - 100mA
      Local or PoE powered

Memory: 8Mbytes Flash for GUI and IR commands

2 way RS232 Ethernet and IR Routing
       With Axium AX-R1D or AX-R4D controller

Up to 300m Cat5E ‘Home run’ RJ45 terminated cable
        When using the legacy keypad connection

Up to 95m Cat5E 568A terminated cable for IP connection