JBL CBT 50LA-1 (White) Each

CBT 50LA-1

Constant Beamwidth Technology Line Array Column Loudspeaker with Eight 50 mm (2 in) Drivers. With improved mounting bracket for enhanced aiming flexibility.
The CBT 50LA-1, with Constant Beamwidth Technology, represents a breakthrough in pattern control, utilizing analog delay beam-forming and amplitude tapering to accomplish consistent vertical coverage without the narrow vertical beaming and out-of-coverage lobing that are typical of straight form-factor passive column speakers.

FEATURES:

• Patent-pending Constant Beamwidth Technology provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
• Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode.
• Dynamic SonicGuard overload protection
• Built-in 70V/100V transformer, plus 8 ohm direct capability.
• Swivel (pan) / tilt wall bracket included.

SPECIFICATIONS:

• Components - Eight 50 mm (2 in) Full-Range
• Frequency Range (-10 dB) - 80 Hz – 20 kHz
• Coverage Pattern - Vertical 20° (1.5 kHz - 16 kHz, ±10°) and Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°)
• Sensitivity (2.83V@ 1m) - 93 dB (speech mode, 2 kHz - 14 kHz) and 89 dB (music mode, 300 Hz - 18 kHz)
• Nominal Impedance - 8 ohms
• Power Capacity (8 ohm setting) - 150W (600W peak), 2 hrs and 100 W (400W peak), 100 hrs
• Max SPL - Speech mode: 115 dB cont ave (121 peak) and Music mode: 111 dB cont ave (117 peak)
• 70V/100V Transformer Taps - 60W, 30W, 15W, (7.5W at 70V only), and 8Ω thru, via switch
• Enclosure - Fiberglass reinforced ABS cabinet, painted aluminum grille
• Outdoor Capability - IP-54 rated, per IEC529. UV, moisture and salt-spray resistant
• Colors - Black or White (-WH)
• Insert Points - Ten M6 insert points on back panel.
• Mounting - Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.
• Dimensions (H x W x D) - 528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in)
• Net Weight - 4.1 kg (9.0 lb)
• Included Accessories - Swivel (pan) / tilt wall bracket
• Optional Accessories - MTC-PC2 terminal panel cover, MTC-CBT-FM1 flush-mount low-profile wall-mount bracket and MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand