JBL Control 12C-VA Pair

JBL Control 12C-VA

Control 12C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 3" full-range driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material, with a pre-attached blind-mount back-can for quick and easy installation. Combined 70V/100V and low impedance direct operation. 20 Watts at 8 nominal setting. 15W multi-tap at 70V/100V. 68Hz – 70kHz bandwidth with 130° coverage.

FEATURES:

• 76 mm (3 in) full-range driver
• EN54-24 Compliant
• Blind-mount backcan for quick and easy install
• Combined 70V/100V and low impedance direct operation
  • 20 Watts at 8Ω nominal setting
  • 15W multi-tap at 70V/100V
• 68 Hz – 17 kHz bandwidth with wide 130° coverage

SPECIFICATIONS:

Frequency Range (-10 dB) - 68 Hz – 17 kHz
Frequency Response (±3 dB) - 95 Hz – 15 kHz
Power Capacity (at low-Z) - 40 Watts Continuous Program Power
                                            20 Watts Continuous Pink Noise
Rated Noise Power - 15W (15W tap)
Rated Noise Voltage - 70V/100V (with 70V/100V tap settings)
Nominal Sensitivity - 84 dB: 8 ohm tap
EN54 Sensitivity (@ 4m) - 72 dB (per EN54-24 spectrum and measurement conditions at 4 meters.)
Coverage Pattern - 130° conical coverage (1 kHz - 16 kHz)
Coverage Angels
(by Frequency)
Conical (Vertical & Horizontal) - 500 Hz: 180°
                                                  1000 Hz: 175°
                                                  2000 Hz: 170°
                                                  4000 Hz: 160°
Reference Axis - Specification and measurement reference is directly on-axis vertically and                                         horizontally, directly below the speaker as speaker it is installed in the horizontal                               ceiling plane
Directivity Factor (Q) - 9.8
Directivity Index (DI) - 7.4 dB
Rated Maximum SPL - 97 dB @ 1 m (3.3 ft) average, 103 dB peak
EN54 Max SPL - (@ 4m) 84 dB (per EN54-24 spectrum and measurement 15W tap, at 4 meters)
Nominal Impedance - 8 ohms (in direct/bypass 8Ω setting)
                                  1.9W@70V; 3.8W@100V Tap: 2667Ω
                                  3.8W@70V; 7.5W@100V Tap: 1333Ω
                                  7.5W@70V; 15W@100V Tap: 667Ω
                                  15W@70V; N/C@100V Tap: 333Ω
Transformer Taps - 15W, 7.5W, 3.8W @ 70V or 100V (plus 1.9W @ 70V only)
Fuse - Thermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC
Driver - 76 mm (3 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice                 coil former, high temperature voice coil
Connections - Input +, Input -, Earth (connected to backcan). Ceramic block with brass inserts (3.2                         mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire.
Gland Nut/Strain Relief - Accommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm                                           (0.36 in)
Materials - ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
Safety Agency - EN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with                                BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling                                  spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL                                        registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and                          UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems
Dimensions (H x W x D) - 196 mm diameter x 174 mm from back of baffle to back of gland nut (7.7                                          in diameter x 6.9 in in depth)
Ceiling Cutout Size - Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template                                          included)
Ceiling Thickness Range - Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thickceiling dog-ears                                          available for up to 55 mm (2.2 in) ceiling thicknesses
Safety Seismic Attachment - One point, top surface
Net Weight - 1.6 kg (3.5 lbs, one speaker)
Shipping Weight - 6.7 kg (14.7 lbs, pair in master carton)
Included Accessories - C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile                                             spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile                                     spans), cutout template, paint shield, grille
Optional Accessories - MTC-12WG high humidity grille
                                    MTC-24NC new construction bracket
                                    MTC-24MR mud-ring construction bracket
                                    MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in,                                       ordering one set = 24 dogears for 8 speakers)
                                   MTC-48TR tile rail for 1200 mm (4 ft) tile spans