JBL Control 16C-VA Pair

JBL Control 16C-VA

Control 16C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 6.5" high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material, with a pre-attached blind-mount back-can for quick and easy installation. Combined 70V/100V and low impedance direct operation. 50 Watts at 8 nominal setting. 30W multi-tap at 70V/100V. 62Hz – 20 kHz bandwidth with 110° coverage.

FEATURES:

• Components:
  • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
  • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
• EN54-24 Compliant
• Blind-mount backcan for quick and easy install
• Combined 70V/100V and low impedance direct operation
  • 50 Watts at 8Ω nominal setting
  • 30W multi-tap at 70V/100V
• 62 Hz – 20 kHz bandwidth with wide 110° coverage
• High 91 dB sensitivity for high maximum SPL

SPECIFICATIONS:

Frequency Range (-10 dB) - 62 Hz – 20 kHz
Frequency Response (±3 dB) - 96 Hz – 15 kHz
Power Capacity (at low-Z) - Power Capacity (at low-Z)2: 100 Watts Continuous Program Power 
                                            50 Watts Continuous Pink Noise
Rated Noise Power - 30W (30W tap)
Rated Noise Voltage - 70V/100V (with 70V/100V tap settings)
Nominal Sensitivity - 91 dB: 8 ohm tap
EN54 Sensitivity (@ 4m) - 77 dB (per EN54-24 spectrum and measurement conditions at 4 meters).
Coverage Pattern - 110° conical coverage (1 kHz - 16 kHz)
Coverage Angels
(by Frequency)
Conical (Vertical & Horizontal) - 500 Hz: 180°
                                                  1000 Hz: 160°
                                                  2000 Hz: 155°
                                                  4000 Hz: 92°
Reference Axis - Specification and measurement reference is directly on-axis vertically and                                         horizontally, directly below the speaker as speaker it is installed in the horizontal                               ceiling plane
Directivity Factor (Q) - 7.8
Directivity Index (DI) - 8.2 dB
Rated Maximum SPL - 108 dB @ 1 m (3.3 ft) average, 116 dB peak
EN54 Max SPL (@ 4m) - 91 dB (per EN54-24 spectrum and measurement conditions, 30W tap, at 4                                        meters)
Nominal Impedance - 8 ohms (in direct/bypass 8 ohm setting); EN54 nominal impedance 7 ohms                                       (based on min Z of 5.7 ohms at 11.2 kHz) 
                                  3.8W@70V; 7.5W@100V Tap: 1333Ω 
                                  7.5W@70V; 15W@100V Tap: 667Ω 
                                  15W@70V; 30W@100V Tap: 333Ω 
                                  30W@70V; N/C@100V Tap: 166Ω
Transformer Taps - 30W, 15W, 7.5W @ 70V or 100V (plus 3.8W @ 70V only)
Fuse - Thermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC
LF Driver - 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum                      voice coil former, high temperature voice coil

HF Driver - 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide                  dispersion waveguide
Connections - Input +, Input -, Earth (connected to backcan). Ceramic with brass inserts (3.2                                 mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire
Gland Nut/Strain Relief - Accommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm                                           (0.36 in)
Materials - ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
Safety Agency - EN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with                                BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling                                  spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL                                        registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and                         UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems
Dimensions (H x W x D) - 253 mm diameter x 262 mm from back of baffle to back of gland nut                                               (10.0 in diameter x 10.3 in in depth)
Ceiling Cutout Size - Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout template                                          included)
Ceiling Thickness Range - Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thickceiling dog-ears                                         available for up to 60 mm (2.4 in) ceiling thicknesses
Safety Seismic Attachment - One point, top surface
Net Weight - 3.4 kg (7.4 lbs, one speaker)
Shipping Weight - 11.2 kg (24.7 lbs, pair in master carton)
Included Accessories - C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile                                             spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile                                     spans), cutout template, paint shield, grille
Optional Accessories - MTC-16WG high humidity grille 
                                    MTC-26NC new construction bracket 
                                    MTC-26MR mud-ring construction bracket 
                                    MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in,                                       ordering one set = 24 dogears for 6 speakers) 
                                    MTC-48TR tile rail for 1200 mm (4 ft) tile spans