JBL Control 30 (White) Each

Control 30

Three-Way High Output Indoor / Outdoor Monitor Speaker
The Control 30 utilizes high power components, computer optimized horn and coaxial component design, patent-pending cabinet manufacturing techniques, and a complex network to achieve smooth high fidelity performance, extended bandwidth and well-controlled, defined coverage from a compact loudspeaker.

FEATURES:

• Extended bandwidth, extremely smooth frequency response.
• Fully outdoor-capable design, featuring WeatherMax.
• 120° x 110° HF coverage.
• 150 W transformer for 70 V or 100 V lines, with 8 thru.
• SonicGuard overload protection.
• 250 mm (10 in) fiberglass / Kevlar cone LF woofer, with neodymium magnet coaxial 125 mm (5 in) anodized aluminum cone MR, and 25 mm (1 in) titanium diaphragm compression driver.
• Includes InvisiBall mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
• Sealed input panel cover and screw-down input terminals.

SPECIFICATIONS:

• Frequency Range - 38 Hz – 17 kHz (-10 dB)
• Power Capacity - 500 W Continuous Program Power; 250 W Continuous Pink Noise
• Transformer Taps - 70 V: 150 W, 75 W, 38 W, 19 W 100 V: 150 W, 75 W, 38 W. Thru Position: 4 ohms nominal
• Frequency Response - 40 Hz – 16 kHz ( ± 3 dB)
• Maximum SPL @ 1m - Short-Term: 123 dB; Long-Term: 117 dB
• Nominal Sensitivity - 93 dB, 1W @ 1m (3.3 ft)
• Nominal Coverage Angle - 120° H x 110° V
• Directivity Factor (Q) - 5.2 dB, averaged 500 Hz to 10 kHz
• Directivity Index (DI) - 7.1 dB, averaged 500 Hz to 10 kHz
• Nominal Impedance - 4 ohms
• Crossover Network - 3rd order Low Pass LF, 2nd order High Pass/3rd order Low Pass MF, 3rd order High Pass, HF, plus conjugate shaping circuitry.
• Low Frequency - 250 mm (10 in) fiberglass/Kevlar cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former, neodymium magnet
• Mid Frequency - 125 mm (5 in) anodized aluminum cone with EPDM rubber (Terpolymer of Ethylene and Propylene) surround, 25 mm (1 in) voice coil on fiberglass former
• High Frequency - 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
• Enclosure Material - High Impact PolyStyrene (HIPS) with 10% glass fill plus patent pending internal 5 mm foamed polyurethane secondary mold
• Grille - Thermoset composite coated steel, WeatherMax multi-layer foam
• Overload Protection - SonicGuard full range power limiting to protect network and transducers.
• Environmental - IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
• Terminations - Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open
• Safety Agency Rating - Transformer is listed per UL1876
• Colors - Black or white (-WH)
• Dimensions (H x W x D) - 593 x 372 x 345 mm (23.3 x 14.6 x 13.5 in.)
• Net Weight (ea) - 18.9 kg (42 lb)
• Shipping Weight (ea) - 20.3 kg (45 lb)
• Included Accessories - 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 305 mm InvisiBall Hex wrench.
• Optional Accessories - MTC-30CM (-WH) to install speaker down from the ceiling. MTC-30UB (-WH) U-Bracket