JBL Control 50S/T (White) Speaker Each

Control 50S/T

Surface-Mount Subwoofer for Subwoofer-Satellite 
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

FEATURES:

• Full bandwidth 32 Hz – 20 kHz high fidelity sound
• Selectable 70V/100V for distributed lines, or low impedance
• Versatility for either two or four satellite speakers per system
• Available in black or white

SPECIFICATIONS:

• Frequency Range (-10 dB) - 32 Hz – 200 Hz
• Frequency Response (±3 dB) - 50 Hz – 150 Hz
• Power Capacity - 300 Watts Continuous Program Power (2 hrs), 150 Watts Continuous Pink Noise (2 hrs), 200 Watts Continuous Program Power (100 hrs) and 100 Watts Continuous Pink Noise (100 hrs)
• Nominal Sensitivity (2.83V, 1m) - 95 dB (near corner), 89 dB (center of wall)
• Rated Maximum SPL (1m) - 115 dB average, 121 dB peak (near corner) and 109 dB average, 115 dB peak (center of wall)
• Nominal Impedance - 8 ohms (in bypass/thru mode)
• Transformer Taps - 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
• Transducer Driver - 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
• Input Connectors - Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Material - Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
• Dimensions (H x W x D) - Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in) and Wall Bracket: 15 mm (0.6 in) deep
• Wall Bracket - 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
• Net Weight - 9.0 kg (20 lbs)
• Shipping Weight - 10.2 kg (23 lbs)
• Included Accessories - Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors and M6 screw for safety lanyard attachment.