JBL Control 52 Pair of Speakers

Control 52

Surface-Mount Satellite Speaker for Subwoofer-Satellite 
Loudspeaker System
The stylish Control 52 satellite loudspeaker produces superb high fidelity sound via a low distortion 60 mm (2.5 in) driver, which features a secondary bucking magnet for high efficiency, rubber half roll surround for enhanced bass performance, 19 mm (0.75 in) copper clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for more consistent impedance and extended high frequency response. The wall bracket allows each speaker to be angled up to 45° off-axis.

FEATURES:

• Stylish, unobtrusive design fits into a wide variety of decors
• Ability to intermix with Control 42C in-ceiling and Control 62P pendant satellite speakers
• 16 ohms impedance
• Wall-mount brackets included
• Available in black or white

SPECIFICATIONS:

• Frequency Range (-10 dB) - 140 Hz – 20 kHz
• Frequency Response (±3 dB) - 180 Hz – 17 kHz
• Power Capacity - 50 Watts Continuous Program Power (2 hrs), 25 Watts Continuous Pink Noise (2 hrs), 30 Watts Continuous Program Power (100 hrs) and 15 Watts Continuous Pink Noise (100 hrs)
• Nominal Sensitivity - 85 dB (4.0V/1m = 1W) and 82 dB (2.83V, 1m)
• Nominal Coverage Angle - 150° x 150° (omnidirectional)
• Rated Maximum SPL (1m) - 94 dB average, 100 dB peak
• Nominal Impedance - 16 ohms
• Transducer Driver - 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex® former, secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
• Input Connector - Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Material - High impact polystyrene, painted zinc-plated metal grille.
• Dimensions (H x W x D) - Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in) and Wall bracket: 51 mm (2.0 in)
• Net Weight - 0.7 kg (1.5 lbs)
• Shipping Weight - 0.8 kg (1.8 lbs)
• Included Accessories - Wall bracket (both speaker and wall parts), 2-pin locking connector.