Inter-M MX-1243 12CH Input 3 Band EQ 4 AUX Outputs Mixer PFL AFL Phantom Power
- 12CH INPUT AND 4 OUTPUT
- 3 BAND TONE CONTROLS
- 4 AUX SEND AND AUX RETURN
- OUTPUT MONITORING
- PFL/AFL FUNCTION
- PHANTOM POWER
- 12CH INPUT AND 4 OUTPUT
Any sound source of microphones, cassette decks, electric guitars, organs can be applied to the 12 channel input,
and 4 AUX SEND, MONO OUT and MAIN L, R OUT are provided for convenient use.
- 3 BAND TONE CONTROLS
3 band tone controls are provided to adjust the acoustic characteristics according to microphones, speakers and
room structured.
- AUX SEND AND AUX RETURN
For the convenient use of effect equipment, reverb, delay or phasor AUX SEND and AUX RETURN function are provided.
- OUTPUT MONITORING
You can monitor by LED meter and headphone.
- PFL/AFL FUNCTION
The PFL/AFL function allows you to monitor through headphone any input channel before the channel fader and
AUX output channel after the AUX SEND volume.
- PHANTOM POWER
Phantom power is provided for easy connection of condenser microphones requiring an external power supply.
Specification
MX-1243 | |
Maximum Output Level | +24dB @ 600Ω, 0.5% THD at 1kHz (BAL) Main Out L/R |
+24dB @ 600Ω, 0.5% THD at 1kHz (BAL) Mono Out | |
+20dB @ 600Ω, 0.5% THD at 1kHz (UNBAL) AUX Send 1-4 | |
100mW @ 40Ω, 0.5% THD at 1kHz Headphone | |
Input Sensitivity & Impedance | -60dB @ 600Ω (BAL) Mic (CH1-CH12) |
-20dB @ 10kΩ (BAL) Line (CH1-CH12) | |
+4dB @ 10kΩ (UNBAL) AUX Return | |
THD | 0.1% @ +14dB, 20-20kHz (MAIN OUT L/R @ 600Ω, MONO OUT @ 600Ω, AUX SEND @ 600Ω) |
Frequency Response | +1dB/-2dB, 20-20kHz @ +4dB (MAIN OUT L/R @ 600Ω, MONO OUT @ 600Ω, AUX SEND @600Ω) |
EQ Characteristics | ±12dB 12kHz Shelving (Max ±15dB) High |
±12dB 2.5kHz Peaking Mid | |
±12dB 80Hz Shelving (Max ±15dB) Low | |
Hum & Noise (Average, Rs=150Ω) (Measured with DIN Audio) |
-127dB Equivalent Input Noise -95dB Residual Noise (MAIN OUT L/R @ 600Ω, MONO OUT @ 600Ω, AUX SEND @ 600Ω) |
-76dB Main Out L/R, Mono Out (INPUT VR & FADER MIN/OUTPUT FADER MAX) |
|
-68dB AUX Send 1-4 (INPUT VR & FADER MIN/OUTPUT VR & FADER MAX) | |
Crosstalk | -70dB Adjacent Input Channels |
-70dB Input to Output | |
Maximum Voltage Gain | 84dB Mic to Main Out L/R, Mono Out |
76dB Mic to AUX Send | |
44dB Line to Main Out L/R, Mono Out | |
36dB Line to AUX Send | |
20dB AUX Return to Main Out L/R, Mono Out | |
Gain Adjustment | 44dB Mic In/Line In |
LED Meter | “0” +4dB Output Level |
CH. Peak Indicators | Red LED on each channel lights when pre-EQ or post-fader signal reaches 3dB below clip level. |
Operating temperature | -10˚C ~ +40˚C |
Phantom voltage | DC +48V |
Power Source | AC 100-120V or AC 220-240V, 50/60Hz (Supplied AC mains transformer depends on country requirements) |
Power Consumption | 25W |
Dimensions | 7.5kg |
Weight | 482(W)×104(H)×310(D)mm |