Rako WMT-400 400W Trailing Edge Plauggable Dimmer Module for use with RAK8-MB Dimmer Rack

Rako WMT-400 400W Trailing Edge Pluggable Dimmer Module for use with RAK8-MB Dimmer Rack

Trailing Edge 400W RAK8 Control Card Dimmer.
Ideal for both halogen and Mains dimmable LED loads.
Quiet Dimming and Built in Short Circuit Protection.

The WMT-400 is a pluggable trailing edge dimmer module to be used with the RAK8-MB.

The unit is plugged directly into one of the slots on the RAK8- MB.

The WMT-400 can be used in combination with any of the other modules compatible with the RAK8 allowing for greater flexibility during both specification and installation.

Trailing edge dimming technology gives smooth quiet dimming of electronic transformer fed loads and maximises dimming performance of most GU10 and other LED fittings.

The WMT-400 combines with the RAK8-MB to provide a centralised lighting control system that can integrate with either wireless or wired Rako products.

The WMT-400 uses trailing edge dimming technology to maximise the performance of most dimmable LED downlights including GU10s and integrated downlights (refer to Rako Controls LED test page for compatibility and maximum loadings: leds.rakocontrols.com).

The WMT400 is also the recommended dimmer for GU10 tungsten lamps due to its in-built short-circuit protection, necessary with this style of lamps.

Maximum loading is 400W of mains halogen or 200W of mains dimmable LED lamps.

As with all RAK8 pluggable modules no memory is stored on the WMT400.

All programming is stored on the motherboard meaning the WMT400 can be swapped with any other module without the need to be reprogrammed.

For other module fitting types for the RAK8 please see the Rako: WML-400, WDA-600 & WMS-600

technical data dimensions

115x25x28mm protection
Auto resetting over current protection Auto thermal shutdown Voltage surge protection

maximum loading 400W - Mains Halogen 200W - Mains dimmable LEDs
minimum loading 1W

weight 50g

climate range Temperature +2C to +40C

Humidity +5% to 95% non condensing standards

communication RS485 to other RAKs, RX-Link and RAK-Link connections Pluggable module