JBL VRX932LAP

VRX932LAP

12 in. Two-Way Powered Line Array Loudspeaker System
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.

FEATURES:

• Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
• JBL's exclusive neodymium magned Differential Drive woofer for high-power capacity and light-weight.
• VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
• Constant Curvature waveguide for unprecedented array coherence.
• Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
• Array Configuration Selector permits "array shading".

SPECIFICATIONS:

• Power Rating - 1750 Watts Peak, 875 Watts Continuous
• Frequency Range - 57 Hz - 20 kHz (-10 dB)
• Dimensions (H x W x D) - 349 mm x 597 mm x 444 mm (13.75 in x 23.5 in x 17.5 in)
• Frequency Response - 75 Hz - 20 Hz (+/-3db)
• Maximum Peak Output - 136 dB SPL at 1m
• Coverage Pattern - 100 x 15 nominal
• DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) - LF: 750 Watts, HF: 125 Watts
• DPC-2 Output Sectoin - LF: Dual-Bridged Technology, Class D
• Audio Input Connector - XLR with loop through
• LF Driver - 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
• HF Driver - 3 x JBL 2408J, 38 mm (1.5 in)
• User Controls - Input Attenuator (0-16 dB)
• Signal Processings - DSP based, resident in Input Module
• AC Power Operating Range - 90-132 VAC or 216-264 VAC, 50/60 Hz
• AC Input Connector - Neutrik PowerCon (NAC 3MPA)
• AC Loop Through Connector - Neutrik PowerCon (NAC 3MPB)
• AC Current Requirements - 6A per system at 120V, 3A per system at 240V
• Enclosure - 25/15 mm, 11-ply birch plywood
• Suspension / Mounting - Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
• Finish - Black DuraFlex finish
• Grille - Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
• Net Weight - 24 kg (52 lb)
• Optional Accessories - VRX-AF: Suspension array frame