JBL VRX918SP
£2,430.00
Tax included
£2,025.00 Tax excl.
VRX918SP
18 in. High Power Powered Flying Subwoofer
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18" woofer in a front-loaded, vented enclosure.
VRX918SP
18 in. High Power Powered Flying Subwoofer
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
FEATURES:
- Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive woofer for high-power capacity and light weight.
- Integral rigging hardware for simple connection of enclosures and optional array frame.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Large port area for reduced distortion.
SPECIFICATIONS:
- Power Rating - 1500 Watts Peak, LF: Dual-Bridged Technology, Class D
- Frequency Range - 31 Hz – 220 Hz
- Dimensions (H x W x D) - 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
- Frequency Response - 34 Hz – 220 Hz
- Maximum Peak Output - 126 dB SPL at 1m
- Bandpass Nominal Impedance - LF: 2 x 2 ohms
- LF Driver - 1 x JBL 2268FF 457 mm (18 in) dual voice coil, Differential Drive woofer with neodymium-magnet
- Audio Input Connector - XLR with loop through
- User Controls - Input Attenuator (0-16 dB), Selectable 80 Hz or 120 Hz Low Pass, 80 Hz High-Pass enable/disable for XLR loop thru.
- Signal Processing - DSP based, resident in Input Module
- System Management - DSP based limiters for mechanical and thermal protection
- AC Power Operating Range - 90-132 VAC or 216-264 VAC, 50/60Hz
- AC Line Voltage - User selectable: 120V/240V (-15%, +10%)
- AC Input Connector - Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector - Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements - 6A per system at 120V, 3A per system at 240V
- Enclosure - 18 mm birch plywood.
- Suspension / Mounting - Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
- Finish - Black DuraFlex finish
- Grille - Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Net Weight - 38.5 kg (85 lb)
- Optional Accessories - VRX-AF array frame, SRX718S-CVR: Pull-over padded cover (works with WK-4S), SS4-BK adjustable satellite speaker pole, WK-4S Caster kit
Comments (0)
No customer reviews for the moment.